How do the density and particle size of Biomass burning pellets affect combustion performance?
Publish Time: 2024-04-30
The density and particle size of Biomass burning pellets are important factors affecting their combustion performance. Below is an article on how these two factors affect the burning performance of Biomass burning pellets.
As an environmentally friendly and renewable energy source, the combustion performance of Biomass burning pellets is directly related to energy efficiency and environmental benefits. Among them, density and particle size are two key parameters that affect the combustion performance of Biomass burning pellets.
First of all, density has an important impact on the burning performance of Biomass burning pellets. Biomass burning pellets with higher density can provide more heat and energy due to their greater mass per unit volume when burning. This high-density combustion method can make combustion more complete, reduce the emission of unburned substances, and improve combustion efficiency. At the same time, high-density combustion can also reduce heat loss during the combustion process and improve energy utilization efficiency.
Secondly, particle size is also an important factor affecting the combustion performance of Biomass burning pellets. Generally speaking, smaller particle size can increase the surface area of Biomass burning pellets, thus increasing the contact area with air, which is beneficial to the combustion reaction. At the same time, smaller particle size can also shorten the residence time of fuel in the furnace, speed up the combustion speed, and improve combustion efficiency. However, too small a particle size will also cause some problems, such as unstable combustion and easy generation of fly ash.
Therefore, when selecting Biomass burning pellets, its density and particle size need to be considered comprehensively. Generally speaking, Biomass burning pellets with moderate density and smaller particle size have better burning performance. In addition, during the combustion process, combustion parameters, such as combustion temperature, combustion time, etc., need to be adjusted according to specific conditions to give full play to the combustion performance of Biomass burning pellets and achieve efficient and environmentally friendly energy utilization.
